Iseo IS9100 - electromechanical swing door operator is suitable for single or double doors
Ideal for use in the Medical or Aged care sectors.
The standard IS9100 operator is suitable for use on doors up to 120kg in weight and 700mm in wide. - with an upgrade card available to increase the capacity to 160kg in weight and 1100mm in width
the IS9100 can be opened in 2 modes: Automatic swing door mode (i.e. opening after a pulse generated by motion sensor or pushbutton) and manual opening mode: (i.e. the device is used as a traditional door closer).
The drive is equipped either with a sliding arm for the installation on the pull side or with a standard arm for the installation on the push side with lintel depth of 225mm maximum.
An integrated internal selector provides the ability to easily set 4 different functions: Off, Automatic, Permanent opening, Exit only. In case of power failure, the device works like a simple door closer. With the manual mode, the function "power assists" allowing for easier opening.
For single action doors
RV Force EN 2 - 4
Standard arm approved for use on NZ Fire Doors
Sliding arm: pull side
Standard arm: push side
Adjustment available for closing speed, latching action or silent closing